Bluefin LED Piranha P12 Dual Colour Underwater Boat Light Aluminium Base
Bluefin LED
AW-16549334941
Items that are out of stock or low please contact us to confirm current stock levels sales@sadlersmaritime.com.au
Special Order
will be contacted with an ETA
The Piranha P6 Nitro Underwater Light allows you to switch between normal or ‘Nitro’ power, where light brightness is increased by 35%. Available in either Diamond White or Cobalt Blue & producing 4,100 fixture lumens, this light will help your boat stand out from the crowd in the marina, river or ocean.
How the P6 Nitro Underwater Light works
This light is incredibly easy to install with just one small cable-entry hole and 3 mounting screws, and is suitable for a wide range of boats. For the number of lights your boat needs to pack a colour punch, Bluefin recommends installing 1-5 lights from the Piranha range on the transom or side of centre-console and runabout boats. Recommended spacing between the lights is from 1.2m (3ft 11 inches) to 2m (6ft 6 inches).
The Piranha P6 is suitable for all hull types on boats up to 14m (45ft) long.
Features:
If hosting a party on your boat isn’t your thing, underwater lights can be great for fishing at night where they not only make it easier to see fish in the water but also attract them to your boat! Different colours penetrate the water to varying depths. Red light can’t be seen past 5m, orange disappears at 10m, yellow at 20m, green (one of the deepest) at 30m, but blue is by far the furthest at 50m.
The human eye is sensitive to both green and blue shades so both colours stand out and are quite spectacular at night if you are looking for the fishing and party effect. However, if you usually boat in clear water, white LED lights are stunning at highlighting the beauty of the water.
How your light appears in the water will vary slightly depending on factors such as the mineral content of the water your vessel is in, how deep it is, sea floor & sediment composition, water pollution, water clarity etc.
Note: Not for installation in chlorinated swimming pools - models designed for pools with special seals are available from the supplier. Please contact us for more info.
| Mounting Type: : | Surface |
|---|---|
| Hole cut out size: | 15mm (Gland size: 13mm) |
| Maximum Lamp Lumens: | 5500 |
| Fixture Lumens: | 4100 |
| Max Wattage: | 40W |
| Typical Life Expectancy: | 50,000 hours |
| Voltage: | 12V or 24V |
| Power Draw: | 3.5A @ 12V / 1.8 amps @ 24V |
| Protection: | Over / Under Voltage, Over Current, Reverse Polarity protection, Active thermal protection and Hydro block technology |
| Fixture Profile: | 17.6mm |
| Fixture Diameter: | 110mm |
| Lens Type: | 3mm optical-grade high-impact polymer, Guard X Coating |
| Fixture Material: | AB2 Bronze (standard) |
| Beam Angle: | 60 Degree |
| Warranty: | 2 Year |
| Type Approval: | RINA IEC 60529 |
| Available Colours: | Diamond White 6500k, Cobalt Blue |
| Suitable Use: | Above & below the water-line |
| Spacing: | 1.2 - 2.0m |
| Driver Type: | Integral |
| Total weight: | 500g |
| Attached cable length: | 1.8m |
| Included in box: | In-line fuse holder & rated fuse, Gel connector, Inline Crimps, Heat shrink, Fixing Screws, Template and installation instructions |
| Optional Accessories: (sold separately) |
• Junction Box: 4-way IP68 Wiring Junction Box • BL-Switch: Panel-mount illuminated switch & wiring loom • I.Y.S Lighting Control: Control via MFD screen or mobile device |