Viper S Series MICRO Drum Anchor Winch Bundle

The Viper S-series Micro Winch features an all-stainless steel construction including a 316-grade stainless steel gearbox. Designed to fit into bow riders, tinnies, walk-around’s, bass boats and any boat with restricted anchor well space or even none at all.

Suit vessel length: 4m to 8m

It includes a 1000w submersible electric motor made from hand-polished 316 stainless steel and rotates its drum at speeds of up to 40m per minute (fall rate) ensuring you get onto your GPS mark each and every time!

The Viper S-series Micro Winch has more torque than a conventional drum winch; three support bearings hugging a one-piece solid shaft and a welded housing bracket that closes up the gap between your drum to prevent rope jams.

Constructed from 8mm-plate 316 marine-grade stainless steel, it also comes standard with a life-time warranty against water intrusion plus a five-year Viper performance warranty.

The Micro Winch is bundled with everything needed including a 5mm stainless steel sandwich plate, stainless steel bolts/screws/nylocs/washers, two face plates and rope, chain and swivel. All you have to add is your own cabling or tinned copper marine wiring looms (see related products)and you will never have to break your back pulling up your anchor and chain again!

Please note: 1m of 3B&S cables is already attached to the motor and leak tested, so there is no need to remove end caps that are not sealed properly!

Features:

• 28mm stainless steel shaft with three support bearings 
• 1000W stainless steel submersible electric motor
• 316-grade polished stainless steel plate 
• 316-grade stainless steel worm drive gearbox
• 3600 motor rotation, 16 different positions
• Max fall rate: 45m per minute
• Max retrieval rate: 40m per minute
• Suit vessel length: 4 to 8 meters
• Max load: 180kgs
• Weight: 13kgs
• Motor water protection rating: IP68
• 5 year warranty

Kit Bundle Includes:

• 1x Viper Pro S-Series 1000 Micro Winch
• Choice of rope kit:
  • 60m x 6mm Double Braid Premium rope
  • 100m x 4mm 12 Plait Uhmwpe Hi-Spec 3000 rope
    • Hi-Spec rope kit also includes: 10m x 8mm 3 Strand Polyester shock cord spiced at both ends
• 6m x 6mm Galvanised short link anchor chain
• Viper pro series anchor swivel - small
• Viper deluxe anchor roller - small
• 200amp reversing solenoid 
• LED illuminated marine rocker switch 
• Viper laser etched led illuminated switch cover 
• 100 amp flush mount circuit breaker with rubber seal 
• Single LED switch stainless steel face plate 
• Combo led switch & circuit breaker s/s face plate 
• 5mm stainless steel sandwich plate 
• All fixing hardware 
• Installation notes & wiring diagram