A smaller unit designed mainly for RV/Caravan use, the Trail King II freshwater pump features 4 independent chambers to deliver a smooth flow for up to 3 applications (galley, shower etc). With a flow rate of 3 GPM, this automatic demand pump is super quiet and can run dry without damage.
The thermally and ignition protected motor is sealed, seamless, corrosion resistant and electro-coated, and is manufactured to withstand tough marine conditions. The built-in adjustable by-pass valve gives top performance and smooth flow, without rapid pump cycling or the need for an accumulator.
This pump has 1/2” male thread NPT ports. Installation of a strainer is required to prevent debris from entering the pump (see related products). If a strainer is not installed prior to the pump, then the warranty is not valid.
Note: This product is the pump ONLY (see related products for Trail King II Pump Kit with Fittings)
Product Features:
- 4 independent chambers
- Co-molded diaphragm
- Adjustable by-pass
- Adjustable pressure switch
- Self-priming up to 1.8m (6ft)
- Dry run capability
- Sealed switch
- Sealed motor
- Corrosion resistant electro coated motor
- Thermally protected
- Must use an adequate 50-mesh strainer (see related products)
- Designed for intermittent duty only
- Approvals: Ignition protected (ISO 8849), CE
For more specifications, download the manual or data sheets found under the "Resources" tab.
SKU | Voltage | Flow Rate (Gallons per Minute) |
Flow Rate (Litres per Minute) |
Amps | Shut-Off Pressure |
---|---|---|---|---|---|
1190527 | 12V | 3 GPM | 11.35 LPM | 5.3 | 45 PSI (3.1 BAR) |