Shurflo Pro Baitmaster™ II pump has been created with unique over-molded single-piece diaphragm, assuring long life and top performance in all livewell or deck wash down plumbing systems. This pump is quiet, thermally protected and can run dry without damage.
Designed to handle the harsh marine environment, the Pro Baitmaster™ II motor is protected by an integral thermal breaker. The pressure switches are sealed and the motors are finished with Electro-coating to inhibit corrosion. It can be mounted in an environment where "splashed water" may be present as it is enclosed to prevent incidental moisture from entering; however, this pump is not submersible.
The Pro Baitmaster™ II pump delivers water on demand. With the output side closed (valve off) the pump will turn off, and as the valve is opened the pressure within the output side drops. Once the pressure drops below a pre-determined point the pressure switch closes and the pump turns on. If the output side is wide open the pump operates continuously. When the valve is partially opened the pump may cycle ON/OFF (intermittent duty) as it is able to pressurize faster than the water is being released.
This pump includes 2x 3/4" hose barb fittings, 1x 3/4" GHT fitting and an inlet strainer to prevent debris from entering the pump.
Features:
- Livewell or Wash Down application
- General water transfer
- Includes fittings and mesh strainer
- 4 independent chambers
- Co-Molded diaphragm
- Adjustable pressure switch
- Self-priming up to 6 feet
- Sealed switch & motor
- Corrosion resistant electro-coated motor
- For tank size 35 gallons and under
- Thermally protected, Ignition protected, CE
- 2 year warranty
JPW | Voltage | Flow Rate (Gallons per minute) |
Flow Rate (Litres per minute) |
Amps | Shut-off Pressure |
---|---|---|---|---|---|
JPW3535 | 12V | 4 GPM | 15.1 LPM | 8 | 45 PSI (3.1 BAR) |