Shurflo's macerator pump has a high flow rate and is designed to empty marine and RV waste holding tanks in minutes. It can also clear fish boxes of scales and residual waste as it features a unique stainless steel dual-cut blade that will ground up small debris thoroughly.
The premium impeller has run-dry capability, however to avoid damage to impeller and housing, do not run pump dry for more than 15 – 20 seconds. The thermally and ignition protected motor has a seamless shell design with o-ring sealed end bells and a sealed manual turn key, and is manufactured to withstand tough marine conditions.
When the impeller is wet, the pump is self-priming to a 1.5m (5ft) lift, and a 1.2m (4ft) lift when impeller is dry. For prime performance and to prolong the lifespan of the macerator, you should mount it as close to the tank as possible.
Features:
- High flow rate
- Run-dry capability
- Dual-cut 316-stainless steel blade
- Themally protected
- Seamless shell design
- Flexible Brandonite impeller
- Sealed manual turn key
- Self-priming
- Inlet Port: 1-1/2” Barb and 1-1/2” NPT
- Outlet Port: 1” Barb
- Must be used in proper discharge zones only
- Will not handle large, hard objects or rags
- Approvals: Ignition protected (ISO 8849), CE
For more specifications, download the manual or data sheets found under the "Downloads" tab.
JPW SKU | Voltage | Flow Rate (Gallons per Hour) |
Flow Rate (Litres per Minute) |
Amps | Fuse |
---|---|---|---|---|---|
JPW3536 | 12V | 13 GPH | 49 LPM | 17A | 25A |
JPW3537 | 24V | 13 GPH | 49 LPH | 9A | 15A |