Rule-Mate 1100GPH Automatic Bilge Pump
Rule
$280.01 - $329.00
(No reviews yet)
Write a Review
Rule
Rule-Mate 1100GPH Automatic Bilge Pump
The Rule-Mate 1100GPH Automatic Bilge Pump offers superior pumping performance.
As a fully-automatic pump, it operates using an internal sensor. When the water in the bilge reaches 2" (5cm), the pump will automatically activate, pumping the water to the outside of the boat. When the water reaches 3/8" (0.9cm), the pump will turn itself off until the water level rises again.
This pump also features a back-up system to prevent dry running in the event that the sensor is fouled, reverting itself to a 2.5 minute cycle mode.
Product features:
- State-of-the-art water sensing technology
- No float switch required
- Anti-fouling impeller - provides 10% more flow
- Submersible
- Ignition protection
- Includes back flow preventer
- Air vents in the body help to prevent air locking
- Built-in thermal cut-off
- Two thirds the size of the old model
- Comes with 2 x straight hose outlets: 25mm (1") and 28mm (1 1/8")
| Activation Method | Automatic |
|---|---|
| Voltage | 12v or 24v DC |
| Amperage |
12v: 3.8A @ 12v / 4.8A @ 13.6v 24v: 2.0A @ 24v / 2.3A @ 27.2v |
| Capacity | 1100 GPH (4,160 LPH) |
| Fuse Size |
12v: 7.5A fuse required (not included) 24v: 4.0A fuse required (not included) |
| Height | 112mm |
| Width | 73mm not including discharge |
| Warranty | 3 years |
