Only 1 left in stock
Rule LoPro 900GPH Automatic Bilge Pump
Rule
$219.00
(No reviews yet)
Write a Review
Rule
Rule LoPro 900GPH Automatic Bilge Pump
The Rule LoPro Bilge Pump is small enough to fit into tight spaces in the bilge - yet it packs real pumping power at 900 gallons per hour - 3,400 litres per hour - 57 litres per minute.
This pump includes numerous features for ease of installation, ease of use and multiple options for use.
Product Features:
- Up to 900 GPH - 3,400 LPH - 57 litres per minute at open flow
- Up to 634 GPH - 2,400 LPH - 40 litres per minute at 1 metre head
- Up to 418 GPH - 1,582 LPH - 26 litres per minute at 2 metre head
- Maximum head height - 4 metres = 0 flow
- Compact size - 60mm high (with port to the side), 60mm wide (with port upright
- Length - 245mm
- Full submersible - horizontal or vertical mounting
- Ignition protected - won't create a spark
- Thermal cut-out to prevent overheating if run dry
- Silicone blocked tinned 16 gauge wiring
- Rotating discharge body swivels 180 deg for ease of installation
- Threaded discharge nozzle with multiple hose ports included as standard in the package - 4 different hose parts provided - 1 each 20mm, 25mm & 28mm straight & 1 x 20mm 90 deg elbow
- Straight discharge ports include a nitrile non-return check valve (for use on straight ports only - not to be used on 90 deg port)
- High or low water sensing mode - the pump can be set to start operation at either 33mm or 50mm bilge water height
- Electronic automatic timer mode - the pump can be set to automatically check for water every 2 1/2 minutes - if water is present it will continue to run and pump bilge water. This feature is very handy - however if you leave the boat unattended on a mooring it may run down the battery over time, if you don't have solar panels or a wind generator Etc to constantly charge the battery - in this case set the pump only to high or low mode
- Includes pump test mode
- Includes manual override 3rd wire - requires a Rule 3 Way Panel Switch to operate this feature
- 12 volt 4 amp use a 7.5 amp fuse
- 12 volt DC only - do not run direct off a 240v-12v transformer
- Three-year limited warranty
