Oceansouth Oceansouth T-Top Boat Storage and Slow Towing Cover has been designed to fit T-Top type boats. It will accommodate outriggers mounts VHF & GPS & Rod holders and is suitable for boats without bow rails or low bow rails.

This cover is constructed of the highest quality 280gsm Atlas marine fabric with flat double lock seam stitching and UV threads ensure an extended life expectancy.

Includes a full set of rope ends, cleats, ratchets and tie-down rope for easy gathering and tightening down the cover.

Ideal for winter or long-term storage and recommended for light trailering use (60km/h max).

Features:

Design to fit T-Top type boats.
Cover will accommodate outriggers mounts VHF & GPS & Rod holders
Suitable for boats without or low bow rails
Suitable for long-term storage and light trailering use
Water resistant and breathable fabric
Highest quality 280gsm Atlas marine fabrics (7 year life expectancy)
Flat double lock seam stitching
High quality UV threads
6mm braided rope encased in hem
Includes a full set of rope ends, rope cleats, tie-down rope and rope ratchets
Supplied in a handy bag for storage when not in use

Colour: Light Grey

For correct sizing, we recommend to use both the Measuring Instructions and Overall Fabric Measurements guides below to ensure you choose the correct cover size for your boat.

Note: Total length of the fabric has been made to cover the total length of the boat, from the bow to the stern. This must also accommodate for bow rails, rollers or sprit as these additional features will add to the overall length of the cover.

Note: These covers are designed to protect the boat only, and do not accommodate outboards. Vented, Half or Full covers for outboards are sold separately - please see here: Outboard Engine Covers

JPW SKU	MPN	Boat Length	Max Beam Width	Fabric W x L
JPW11421	MA 505-1	5.3 – 5.6m	2.6m	5900 x 7950mm
JPW11422	MA 505-2	5.6 - 5.9m	2.6m	6000 x 8250mm
JPW11423	MA 505-3	5.9 – 6.2m	2.6m	6100 x 8600mm
JPW11424	MA 505-4	6.2 – 6.5m	2.6m	6200 x 8900mm
JPW11425	MA 505-5	6.5 – 6.8m	2.6m	6300 x 9200mm
JPW11426	MA 505-6	6.8 – 7.2m	2.6m	6400 x 9550mm
JPW11427	MA 505-7	7.2 – 7.5m	2.6m	6500 x 9800mm
JPW11428	MA 505-8	7.5 – 7.8m	2.6m	6500 x 10100mm
JPW11429	MA 505-9	7.8 – 8.1m	3m	6600 x 10400mm
JPW11430	MA 505-10	8.1 – 8.4m	3m	6700 x 10700mm
JPW11431	MA 505-11	8.4 – 8.7m	3m	6800 x 11000mm
JPW11432	MA 505-12	8.7 – 9.0m	3m	6900 x 11350mm
JPW11433	MA 505-13	9.0 – 9.3m	3m	6900 x 11600mm
JPW11434	MA 505-14	9.3 – 9.6m	3m	6900 x 11900mm
JPW11435	MA 505-15	9.6 – 9.9m	3m	6900 x 12150mm
JPW11436	MA 505-16	9.9 – 10.2m	3m	6900 x 12400mm
JPW11437	MA 505-17	10.2 – 10.5m	3m	6900 x 12700mm

Measuring your boat

Measure the length: Measure the centreline length using a straight measurement from bow to stern.
Measure the width: Measure a straight line across the widest point of your boat.

Overall fabric measurements

Measure the width: Take the overall fabric width of your suggested cover and compare it by measuring across widest point on your boat and across the highest point of boat fittings (i.e. windscreens, cabins) to the point on the hull where the hem of the cover will finish.
Measure the length: Take the overall fabric width of your suggested cover and compare it by measuring across the length of your boat from bow to stern, and across the highest point of any fittings (windscreens, cabins, etc.) to the point on the hull where the hem of the cover will finish.