![Jabsco Replacement Motor & Macerator Toilet Assembly 12V or 24V Jabsco Replacement Motor & Macerator Toilet Assembly 12V or 24V](https://cdn11.bigcommerce.com/s-wgzijng1sc/images/stencil/300x300/products/1366/3557/P-J16-223__83505.1702527206.jpg?c=1)
Bronze macerator and rubber impeller discharge pump which macerates and discharges waste and waste mixtures. This macerator pump is suìtable to empty marine holding tanks when not in a discharge restricted area.
The brass pump section is self-priming and this allows the unit to be mounted above the tank in any convenient location (for an excellent efficiency, provide for pump location as close to holding tank as possible).
The macerator section grinds waste down to a very small particle size, so that ìt can be easily pumped through a 1' inside diameter discharge hose. It has been designed to handle waste and toìlet tissue, and will also handle solid objects such as cigarettes, cigars, and small chunks of soft fruits or vegetables. It will not however cope with hard solid objects, sanitary napkins or rags.
It will take less than 3 minutes for the macerator to pump down a typical 30 gallon holding tank.
The DC motor is suitable only for intermittent duty and should not be run for more than 15 minutes continuously. Do not run pump dry longer than 30 seconds or damage may incur to the impeller and pump.
Features:
- Self priming up to 0.6m vertical lift.
- 43 LPM output at 3m total head
- Voltage: 12V or 24V
- Amp draw: 12A @ 12V / 6A @ 24V
- Connection input: 38mm hose barb / output: 25mm
- Dimension: 240x130x90mm
- Motors meet CE electrical standards