Jabsco HD6 Par-Max 6GPM Freshwater Pumps

Jabsco HD6 Par-Max 6GPM Freshwater Pumps

Jabsco
$594.00 - $617.00
(No reviews yet)
Current Stock:
Adding to cart… The item has been added
Description

Installed to provide on‐demand flow and pressure of freshwater to galleys, showers, washing machines, etc. These pumps are equipped with a bypass which enables smoother flow and decreases cycling, and provide similar pressure to that in a home on land.

These HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. With an open flow rate of 6 GPM (22.7 LPM) and choice of either 40PSI (2.8 bar) or 60 PSI (4.1 bar), these pumps deliver exceptional performance. Standard models provide good performance in an economical footprint.

Jabsco’s updated and improved lineup of freshwater supply pumps are designed to provide years of satisfactory service in applications both large and small. 

Kit includes: 

  • 1 x Par-Max HD6 Freshwater Pump
  • 2 x 3/4" (19mm) straight hosebarbs
  • 1 x 90° 40 mesh quick connect strainer

Features:

  • Typical rule of thumb for sizing is 1 GPM per outlet
  • Co-molded diaphragm technology for long life and durability
  • heavy duty motors and cast aluminum lower housings which allow for longlife, even at high pressures
  • Efficient and quiet operation
  • Integrated, sealed pressure switch for on-demand operation
  • Self-priming allows for installation versatility
  • Can run dry without damage
  • Quick connect ports for ease of installation, servicing, and maintenance
  • Vibration dampening mounting feet
  • Equipped with integrated bypass module to reduce cycling and provide smoother flow

 

JPW SKU J20-282 J20-283 J20-284 J20-285
Jabsco Part No. P601J-215S-3A P602J-215S-3A P601J-218S-3A P602J-218S-3A
Replaces Old Versions -
(82600-0292)		 -
(82600-0294)		 J20-184
(82600-0092)		 J20-185
(82600-0094)
Voltage 12V 24V 12V 24V
Open Flow 6 GPM
(22.7 LPM)		 6 GPM
(22.7 LPM)		 6 GPM
(22.7 LPM)		 6 GPM
(22.7 LPM)
Shut-off Pressue 40 PSI
(2.8 BAR)		 40 PSI
(2.8 BAR)		 60 PSI
(4.1 BAR)		 60 PSI
(4.1 BAR)
Max Amp Draw 15A 7A 18A 8A
Recommended Fuse Size 25A 15A 25A 15A

 

Motor Design Brushed, permanent magnet TENV
Pumphead upper housing material Fiber reinforced polypropylene
Diaphragm Santoprene
Check Valves EPDM
Max Inlet Pressure 30 PSI (2.1 Bar)
Fluid Temp Range 32°F – 140°F (0°C – 60°C)
Dry Self-priming Capability 7ft min (2.1m min)
Certifications CE, ISO8846, RCM
Water Ingress protection IPX6
Warranty 3 years

 

Datasheets (for more information):