Gunwale Boat Trim Aluminium Extrusion 50mm x 3.65m
JPW
$313.34
(No reviews yet)
Write a Review
JPW
Gunwale Boat Trim Aluminium Extrusion 50mm x 3.65m
Oversize Product 
Special Packaging Required
**Please Note: PVC rubber insert shown in image is sold per metre separately.**
Gunwale boat fender trim made from etched, brushed anodised aluminium extrusion.
Supplied in 3.65m lengths. To calculate the amount of fendering required, simply double the boat's length and add the boat's beam (width) and then round up to the nearest full (3.65m) length of aluminium.
The black PVC insert to suit is sold per meter and is a related product: Gunwale Boat Trim Insert PVC Black suit 50mm Profile
Install Instructions:
- With one end approximately 1.8m from the bow, line up the aluminium profile with the gunwale.
- Drill and secure with self tapping screws or rivets every 225mm to 300mm
- Pull the profile around the bow fastening as you go.
- Butt up next length of profile and fasten in the same manner.
- For tight bends it is advisable to put some wire in the corners of the internal grooves to prevent the profile collapsing and hindering the fitting of the insert.
- Although our aluminium is of bending quality the larger profiles may need pre-forming or mitering for tight bends
Also available: Gunwale Boat Trim PVC or Aluminium 38mm
