Bomar Replacement Gasket Seal for Low Profile Extruded Hatches with 6mm Lens

Bomar Replacement Gasket Seal for Low Profile Extruded Hatches with 6mm Lens

BOMAR
SKU:
JPW170900
$25.52
(No reviews yet)
Current Stock:
1000
Adding to cart… The item has been added
Description

Replacement gasket seal to suit Bomar Low Profile A & P series NIBO Extruded Deck Hatches with 6mm (1/4") lens thickness.

Sold per foot (1 foot = 0.3048 m) 
The quantity ordered will be the total length in feet (in one continuous length) and once cut it cannot be returned.

 

Replacement gasket seal to suit Bomar Low Profile A & P series NIBO Extruded Deck Hatches with 6mm lens thickness - made after 1999.

Bomar MPN: P2000-09

Suits Bomar Hatch Part Numbers:

  • N1011-10P
  • N1000-10P

Features:

  • Black rubber gasket
  • Sold per foot

Instructions on Replacing Bomar Hatch Gasket with Lip:

  1. Pull out the old gasket 
     
  2. Starting near a hinge, gently push the lip of the gasket into the space between the lens and extrusion.
     
  3. Carefull cut the gasket to length forming a butt joint
     
  4. Pull out two inches of the gasket either side of the joint and super glue together. Be very careful not to get superglue on the lens. Leave for about 5 minutes to allow the adhesive to completely set.
     
  5. Push gasket back into the cavity and apply a drop of glue in the four corners to secure the gasket in place.