Boat Fenders White with Black Tops

Oversize Product

Heavy duty inflatable fenders with black reinforced star pattern heads. Available in a large range of sizes to suit everything from small runabouts to large yachts and cruisers.

**We recommended using the Majoni Fender Bike Pump Adaptor to inflate these fenders (sold separately - see related products)**

Top quality heavy duty inflatable UV resistant PVC Majoni fenders. Manufactured in Holland in the classic European style, this range has black reinforced star pattern heads.

Available in a range of sizes to suit any size vessel, each fender is suppled deflated for shipping but can be inflated easy via an air compressor or a bike pump adaptor fitting.

Also available with blue tops - see related product: Boat Fenders White with Blue Tops

Size shown is diameter x length.

Covers to suit:

• Fender Cover - Single Thickness NAVY
• Fender Cover - Single Thickness BLACK
• Fender Cover - Double Thickness Navy Blue
• Fender Cover - Double Thickness Black
• Fender Cover - Double Thickness Grey

How to use fenders and buoys

Fenders are designed for protection against damage to your boat and are placed in areas where the boat will make contact with another boat or dock. 

The size of the fender required will depend on the size of the boat. On average, six fenders are needed for good protection with three along each side, however you may need more for larger vessels or less for boats that are smaller in size.

Our fenders and buoys require minimal maintenance, you can simply wipe or rinse them down with clean water. If they are grimy and need a proper clean, just add non-abrasive soap to fresh water and lightly scrub them with a damp cloth.

With proper use and care, fenders can protect your boat for more than forty years.

Easy inflation and deflation

We use an unique strong brass valve for easy inflation and deflation of our fenders and buoys. The best way to inflate a fender is pushing air pressure from a compressor with a flat head against the valve and the fender will inflate.

It is also possible to inflate the fender with a bicycle and/or car pump, but only with the use of a special adaptor (see related products). Please do not use a handset with a pin to inflate, because this pin can damage the valve.

The best inflation pressure is 0.2 bar. This is the pressure where it is possible to press the body of the fender easily with your flat hand.

For deflating just push a pen slightly in the valve to let the air out. Due to extreme whether conditions the air pressure in the fender can change, so we advise to check the pressure and shape of your fenders frequently.

Spare valve

You can replace the valve with turning in a bolt M3 (or a woodscrew) and pull it out with a pair of tongs. After inspecting the valve, you can push a new valve back in the tube with your hand or a pen.