![AFI Heavy Duty Waterproof Wiper Motors AFI Heavy Duty Waterproof Wiper Motors](https://cdn11.bigcommerce.com/s-wgzijng1sc/images/stencil/300x300/products/2931/6934/P-RWB5800__37015.1709250682.jpg?c=1)
The AFI 1000 series windscreen wiper motors have a sweep angle up to 110 degrees and are available with either 40mm or 63mm drive shaft length.
The wiper housing is made from UV resistant, high-impact thermoplastics and is fully waterproof.
It powers 450mm long deluxe arm and blade combinations at sweep sets of 80 degree or less, or 400mm long deluxe arm and blade combinations at a sweep set of 110 degree.
The wiper runs on a 12v heavy-duty motor with an anti-rotation drive shaft. The drive shaft is knurled and the arm drive nut is made of solid brass.
Features:
- Fully sealed waterproof housing
- Factory pre-set sweep angle of 110 degrees (adjustable to 50, 65, 80 or 110 degrees)
- Powers arm/blade combinations up to 450mm in length
- 12V heavy-duty single speed motor with anti-rotation drive shaft
- Knurled drive shaft and solid brass arm drive nut
- Coast to park feature with adjustable right or left self parking
- Includes 5 amp fuse and holder
- RF shielded circuitry
- Maximum current draw: 5 Amps
- Shaft diameter: 16mm
- Made in the USA
- 3 year warranty
Shaft Length | 40mm or 63mm (plus knurled arm nut) |
---|---|
Voltage | 12V |
No Load Current | 0.8-1.2 amps |
Stall Current | 10 amps |
Stall Torque | 63kgf/cm 6.2Nm |
Length | 169mm |
Width | 84mm |
Depth | 51mm + drive arm |
Note: Pantographic arms will only function properly with wiper motor sweep angles of 80 degree or less. Wiper motor angle can be easily adjusted.
Match with the following AFI wiper arms:
- Pantographic Adjustable Wiper Arms
- Heavy Duty Wiper Arm Adjustable Stainless Steel 350-500mm
Match with the following AFI wiper blades:
- Plastic Curved Wiper Blade (410mm)
- Stainless Steel Curved Blades (400mm / 450mm / 500mm / 600mm)